Narrow end should be centered with spindle of pedal to work correctly. Clep any excess cable tie ends.

If needed use included spacer under the crankiest magnet. Clip any excess cable tie ends. (Road bikes use magnet not pictured)

Rotate wheel so spoke magnet is in the line with thick end of sensor. When in line approximately distance between magnet and sensor should be 1/8 inch or less. Adjust spoke magnet if needed.

Please remember all bikes and frames are different - use the appearoximate;y 1/8 th in. spacing between the magnets and sensor to ensure you are getting the best results.

Clip any excess cable tie ends

Insert the LiveRider transceiver through the opening at the bottom of the cradle and into the 30 pin connector located on the bottom of your device.

Download and launch the free app using iTunes.®
The main ride screen includes display for cycling data captured, including speed, cadence, distance traveled, and elapsed time.
Slide the green chainlink icon to the left or right to access menu options and set up your ride information.
Select the green chainlink icon at any time to return to the ride screen.

The menu screen provides access to new ride setup, saved ride data, ride map, and settings information.
“Saved Rides” will display time, average speed, cadence, distance, max speed, and calories for each session in graph form. “Saved Rides” will allow you to make ride notes and export all data captured via email.

Select “Settings” to enter your bike information.

Settings options allow you to add your bike information, manage your bike information, turn your device’s auto lock on or off, select your average mode, and access in-app help.
Average mode allows you to control the detail displayed in the average speed and cadence graph.

Select “Help” in your settings options to view app version information, email LiveRider support, or view an in-app overview of LiveRider hardware setup.

Select “Current Bike Settings” in your settings options to add custom bike and ride information.

Choose your bike name, and enter it in the “Name” field. Select your wheel size from the included list.
Your LiveRider sensor will automatically pair with the LiveRider receiver; verify this by rotating your bike wheel.
Select your units (Miles/MPH or Kilometers/KPH). Estimate and enter your riding weight, which includes the weight of your body, bike, and gear.
Select the chainlink icon to save and return to the ride screen.
Press “Start” to begin a new ride.